About the data and methodology
Lynoplad is an independent overview. We are not owned by and have no agreements with charging operators, and nobody can pay for a better position.
Where does the data come from?
The EU AFIR regulation (Article 20) requires operators of public chargers to publish location, power, ad hoc prices and operating status free of charge in an open format (DATEX II). In Denmark the data is registered in the Danish Road Directorate's National Access Point (Dataudveksleren).
Lynoplad collects data directly from operators and platforms (including Spirii, Monta, OK and EV-EL) and from Eco-Movement, which aggregates data for Clever, IONITY, Circle K and others. If the same charge point appears in several sources, we use the operator's own data.
How often is the site updated?
- Operating status: every 5–10 minutes. Fast chargers from Monta operators (e.g. Norlys and Uno-X) are checked in rotation and may be up to a day old.
- Locations and prices: every 30 minutes (Eco-Movement every two hours).
- If we have not received status from the operator for 6 hours (48 hours for Monta), the charger is shown as "unknown" instead of available.
- How fresh the data is for each operator is shown on data quality.
How prices are calculated
- All prices are ad hoc prices without a subscription, including 25 % VAT. If the operator publishes the price without VAT, we add it.
- The price of a location is the lowest price per kWh among its charge points right now.
- Many operators change prices every 15 minutes. We show the price for the current quarter hour and a chart for the next hours.
- Start fees and per-minute prices are shown on the location page but are not included in the price per kWh or in comparisons.
- Prices in other currencies are converted to DKK using European Central Bank rates.
- Prices below DKK 1.50 or above DKK 20 per kWh are left out of medians and top lists, as they are almost always data errors.
- Median price: half of the locations are cheaper, half are more expensive.
Status and uptime
- Status is the operator's own report: Available, In use (charging or reserved), Out of order (fault or out of service) or Unknown (the operator does not report status).
- Uptime is the share of time over 7 and 30 days in which a charge point has not reported "out of order". Time with unknown status is not counted. The number of measured hours is shown for each location.
- A location counts as available if at least one charge point is available.
Reports from drivers
Drivers can report whether a charger works. If at least two have reported "not working" within 24 hours, and there are more failure than working reports, a warning is shown. Reports are anonymous, limited to one per user per hour, and do not change the operator's status or uptime.
Which chargers are included?
Only publicly accessible chargers. Chargers clearly meant for employees, residents, testing or private use are filtered out based on name and operator. If a charger is wrongly included or left out, please send a correction.
Errors in the data?
We show the data as the operators publish it. Operators and drivers can send a correction, which we handle as soon as possible.